The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.

Features:

• Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
• 3,650 slices containing four 6-input LUTs and 8 flip-flops
• 1,620 Kbits of fast block RAM
• Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
• 80 DSP slices
• Internal clock speeds exceeding 450 MHz
• On-chip analog-to-digital converter (XADC)
• Programmable over JTAG and Quad-SPI Flash
• Memory
• 4 MB Quad-SPI Flash
• Power
• Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
• USB
• USB-JTAG programming circuitry
• USB-UART bridge
• Push-buttons and LEDs
• 2 Buttons
• 4 LEDs
• 1 RGB LED
• Expansion Connectors
• 1 Pmod connector
• 8 total FPGA I/O
• 48-pin DIP form-factor headers
• 36 populated pins
• 32 total FPGA I/O
• 2 Single-ended 0-3.3V analog inputs to XADC

Box Includes

• Cmod S7
• Digilent cardboard packaging with protective foam inserts

Reference Manual